Heat exchanger gasket is a term used for gaskets used in shell and tube type heat exchangers. This is usually a metal jacketed gasket with a soft filler for higher temperatures. The styles, materials, configurations are...

1.The graphite gasket  made from  graphite reinforce sheet and can be processed to be internal ring and external ring .The general thickness is 1.5mm, 3.0mm, 2.0mm, 4.0mm . 2. Application: It has very good sealing performance, low preloaded pressure, and not sticking to the flange sealing surface; used in the flange surface sealing of...

1.reprocess the metal gasket to be wave-shaped (mechanical punching)2. suitable materials: soft steel, stainless steel, galvanizaiton steel plate, chrome steel plate, copper, brass copper, Monel alloy.3.thickness:0.3~3mm, the distance between wave peaks: 2.0—6.5mm4. application:the preloaded pressure and soft asbestos rubber plates are mainly...

Code: Kamprofile GasketThe Petrochemical and Chemical industries benefit too, as the gaskets are used in applications where high pressures and temperatures are maintained and consequently high bolt loads need to be controlled.For flange protection the Camprofile gaskets are normally used in conjunction with a covering layer of either PTFE,...

BX type ring joint gaskets are designed for API 6 BX flange grooves only,it is suitable for higher-pressure ratings starting at 2,000 lbs and ending with 20,000 lbs,incorporate a pressure balance hole to ensure equalization of pressure which may get trapped in the...

Octagonal Type cross section RTJ ring joint gaskets are designed for flanges with standard grooves,Website:http://www.gasket-china.com,interchangeable with oval ring joint gaskets on modern octagonal grooved flanges,but has a higher sealing coefficient than the oval ones, RING NO for pipe sizes, it is the same as oval series,please reference the...

We have our new gasket manufacturing facility. Our spiral wound gasket widely use in oil and gasket industrial ,Website:http://www.gasket-china.com,chemical industrial, mining industrial ,power station and most industrial factory The main standard of spiral wound gasket is ASME B16.20 THE SIZE AS BELOW:ASME B16.20　 150LB 　 300LB 　 　...

SS304 Spiral wound seal gasket with inner ring RIR .Characteristics: Good compressibility and rebound elasticity,Website:http://www.gasket-china.com, with multi-channel sealing and certain self-tightening functions, not sensitive to the surface defect of flange clamping plane, and not binding the flange sealing surface, convenient to be...

Graphite Spiral  wound Gasket with inner ring and outer ring CGI.Spiral wound gasket (SWG) consists of a thin metallic strip and soft non-metallic filler that are simultaneously wound on a rotating mandrel. The metal hoop is pre-formed with a V or W shaped profile,Website:http://www.gasket-china.com, which allows the gasket to act as a spring...